Pipe Testing Machine

The pipe testing machine is used to test the pressure bearing capacity of various pipes by the test liquid water-based emulsion. Equipped with compressed air below-drying device, the MAX oil-water balance thrust up to 3000T.

Inquire Now Next Product

Product Description

Product Description

Pipe Testing Machine Introduction:

The Pipe Testing Machine adopts hydrostatic to test the pressure bearing capacity of all kinds of pipes, the Max pipe pressure testing can be 150 Mpa. The pressure tested tube is located inside the frame of Hydrostatic Pipe Testing Machine, to prevent high-pressure water from leaking to the sides to protect people and equipment safety. The surfaces of the loading and unloading material rack and so on which are in contact with the steel pipe are covered with a rubber flat belt to protect the surface of the steel pipe from bumps.

Pipe Testing Machine Features And Advantage:

hydro testing pipe machine.jpg

1) The Pipe Testing Machine adopts PLC and upper computer control.
2) The Pipe Testing Machine can achieve manual, adjustment and automatic 3-working modes.
3) The pipe testing machine has a variety of sealing methods, such as pipe end face seal, inner filled rubber sing seal, outer radial seal and steel frame outer diameter large gap seal.
4) The pipes testing machine Oil-water balance hydraulic valve and the electric control system adopt international Rexroth and Siemens series products.
5) The valve core of the key position used of the high-pressure system adopts the stainless steel hard sealing structure developed by our company rather than the sealing ring. The pipe testing machine is featured With reliable sealing, very low failure rate, long service life and other advantages.

Pipe Testing Machine Parameter

The Hydro Pipe Testing Machine applies to test the pipe OD range φ10 mm-φ1420mm.

The Max pipe length up to 25m, Max pressure testing can be 150Mpa. 1 to 6 pipes can be tested at the same time by one pipe testing machine. Testing scope includes pipes, pipe bends, U-shaped pipe, elbows, etc. Parameter chart as follow:

pipeline hydro testing equipment 3.jpg

Our Service For The Pipe Testing Machine

hydrostatic pipe testing machine.jpg

We Dezhou Yaxing Steel Tube Equipment Factory is a famous pipe testing machine manufacturer, we can provide the equipment from design and manufacturing to installation and debugging all the service. Including:

√ Design the customized technical proposal of pipe testing machine for free.
√ Make the layout drawing of pipe testing machine as per user’s site.
√ Manufacture the pipe testing machine and consumption parts according to requirements.
√ Guide to install and debug and train how to use the pipe test machine.
√ After-sale technology support to update the pipe testing machine program regularly and solve the running issue by online remote.
If you would like to learn more information and interested in an excellent pipe testing machine, welcome to contact us to send an inquiry now!

FAQ-(Frequently Asked Questions)

Q1: Can the hydro testing machine be used for plastic and fiberglass pipes testing?
Yes, it can
Q2: Is the machine equipped with a automatic sorting device?
Yes, if the tested pipe is unqualified, it will be automatically transferred to the unqualified stock bin and warning displayed on the computer screen.
Q3: Is the machine equipped with a pipes baler?
The pipe testing machine is equipped with a U-shaped storage rack. The pipes are automatically transferred to U-shaped storage rack after testing, then need to tied up the pipe manual and hoist away.
Q4: Is the machine equipped with a automatic sorting device?
Yes, if the tested pipe is unqualified, it will be automatically transferred to the unqualified stock bin and warning displayed on the computer screen.

If you still can't find your answer here, please email us!